Material: ABS+Aluminum Alloy
Light source: 1PCS T6+2PCS XPE LED Bulbs
Brightness: 5000 lumens
Luminous gear position: the main light is on-the lights on both sides are on-all three lights are on-long press 2S to enter the light sensing mode
Battery type: 2×18650 rechargeable battery
Charging interface type: MICRO USB
Featured function: light sensor mode can automatically adjust the brightness according to the environment
Focusing: support, push the handle to focus
Waterproof rating: IPX5
Irradiation distance: 300 meters
1. Check the battery: make sure the battery is charged and installed in the correct direction.
2. When using, please choose according to the voltage and battery requirements, please do not use it at will to avoid the circuit board from burning out. Do not use batteries of different types and voltages at the same time.
3. In use, when the brightness changes greatly, please turn off the headlights to prevent over-discharge of the battery. Please pay attention to the waterproof, moisture-proof and drop-proof of the battery.
4. If the battery is not used for a long time, the battery should be taken out and stored properly to avoid chemical corrosion;
5. Keep the inner wall of the lamp cup clean. Do not wipe with hands or hard objects. To remove fingerprints on the lens, you can gently wipe it with a cotton swab dipped in lens cleaner.
6. Do not keep the flashlight in contact with sunlight, water, chemicals and corrosive gases for a long time to avoid damage to the flashlight;
7. Non-professionals should not disassemble the headlamp to avoid damage to the circuit board.