1. Overall waterproof: the lock cover and the lock body form a confined space, and the battery and the circuit board will not touch water source in the closed space state.
2. Stainless steel lock core: upgrade lock cylinder, stainless steel blade lock core, complex internal structure, anti-tin paper light unlocking tool, with anti-smashing and anti-drilling effect
3. Convenient keyless press locking: no key is required for locking, it can be locked by pressing the brake disc. It is a convenient for outdoor riding.
4. The alarm device can be turned on or off: set the alarm on/off according to your needs
5. High-decibel scare away thieves: lock core power support, once the body is touched and vibrated, it will make a sharp alarm sound, enough to shock and scare away thieves
6. Hardening treatment: The lock body is subjected to a heat treatment process to improve hardness and strength, thereby resisting the damage of external force.
7. Original lock bag: It can be fixed on motorcycles when riding, easy to store
Body material: zinc alloy
Lock core material: stainless steel
Product size: 93*47*75mm/3.66*1.85*2.95\"
Net weight: 752g
Gross weight 834g
Packing size is 170*117*70mm/6.69*4.61*2.76\"
Alarm volume: 110 decibels
1. Open the package, remove the small round pad in the groove, remove the hexagonal wrench and save it for use when replacing the battery.
2. This intelligent alarm lock has two functions: with alarm or with no alarm. It can prevent thieves and avoid disturbing people. It is widely used in motorcycles, electric bikes, bicycles, mountain bikes, etc.
3. With alarm: press the lock cylinder to enter the second gear (the lock cylinder and the lock cover are on the same level). When hearing one sound, the lock enters alarm state. After 5 seconds, when the lock or motorcycles receives a certain vibration, it will emit 3 sounds. Then if it receives vibration again, the lock will immediately sound an alarm. Continuous vibration, continuous alarm, each alarm sound lasts 10 seconds.
4. No alarm: press the lock cylinder and enter the first gear (the lock cylinder is about 5mm above the lock cover). If there is no sound, the lock enters the non-alarm state, just like an ordinary mechanical lock.
5. When you hear continuous sounds, it means the battery is exhausted, reminding to replace the battery. When replacing the battery, please use the small wrench provided to unscrew the 4 screws to remove the cover. Please pay attention to the \"positive and negative\" pole of the battery.
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
1 X Lock
3 X Keys
1 Set X Spare Batteries
1 X Hex Wrench