1. The basic tool to quickly and accurately measure pH and chlorine is the most commonly used water disinfectant, used to kill bacteria, algae and microorganisms.
2. The ideal tool for keeping swimming pools or hot springs within a safe range of chlorine and pH, without using chemicals or guessing.
Main unit: 190x20mm/7.48×0.79in
Handle probe: Length 150mm/5.91in
Probe (only): Length 48mm/1.89in
Cable (only): Length 300mm/11.81in
Power supply: 1 X AA alkaline battery (1.5V)
Weight: 160g (without battery)
The recommended chlorine content for swimming pools and SPA is 1.2 to 1.7 ppm
Recommended pH for swimming pools and SPA is 7.2 to 7.8
Use: An electric tester for pH and chlorine (Cl2) levels is used to routinely monitor the pH and chlorine levels of swimming pools, spas, and various water sources.
When chlorine gas and pH are removed from whack, it may cause diarrhea and ear and skin infections.
A good chlorine gas and pH can keep bad bacteria in the bay.
If the pH is too high, the electricity that chlorine gas kills will be exhausted.
When a large amount of nitrogen (feces, urine, sunscreen or sweat) or other organic substances enter the swimming pool, chlorine gas will also be eaten. This is why testing chlorine and pH is the best all the time-it can change every day depending on the use of the swimming pool.
Maintaining your pH within the appropriate range is important for maintaining the surface treatment of equipment and swimming pools. Your chlorine gas will dissolve faster at low pH. High pH will make chlorine gas ineffective.
In addition to the water in the swimming pool or SPA, it is recommended not to put the detector in any water.
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
1 X Swimming Pool pH and Cl2 Probe Tester
1 X Manual
1 X Sandpaper