SWM T7010B Car Stereo 7 inch Screen Bluetooth MP5 Player USB FM Radio Head Unit In Dash Digital Media Receiver
2. Support reading USB flash drive and memory card (audio/video/picture)
3. AUX function
4. Bluetooth function
5. RCA audio output can be connected to subwoofers
6. Rear view function (camera NOT included)
7. Video input
8. Original steering wheel learning function
9. Mobile interconnect: support (for Android/iOS)
Software solution: C200S
Screen size: 7\"
Screen resolution: 800*480
Panel size: 178*100mm/7.01*3.94\"
Panel lighting: colorful lighting
Packing size: 200*113*170mm/7.87*4.45*6.69\"
Host depth: 65mm/2.56\"
Single machine weight: 680g
Mobile interconnect: support (for Android/iOS)
GPS navigation: NOT supported
Radio band: FM
Radio chip: QN8035
Power: 60 W
Operating temperature: -10~60 ℃
Reversing image: support (Rear Camea NOT included)
Brake warning function: support
Steering wheel control function: support
Bluetooth model: CAR-BT
Power amplifier chip: TDA7388
Radio frequency: 87.5~108MHz
Video output: yes
Dual screen simultanueous display: NOT supported
Built-in offline maps: no
WiFi: NOT supported
TF card slot: yes
GPS card slot: none
Remote control: card type remote control
Steering wheel control: no
USB port and version: front panel USB2.0
Reset button: yes
Key: physical buttons
RCA terminal: 2 channels audio output, 1 channel reverse input, 1 channel video input, 2 channels video output
Front AUX audio input: yes
DVR function: no
DAB function: no
OBD function: no
TV function: no
DVD movement model: none
Logo replacement: NOT supported
Supported audio format: MP3/WMA/WAV/APE/FLAC
Supported video format: RM/RMVB/AVI/MP4/MKV/3GP (within 720p)
Supported image format: JPG
Factory password: none
Material: hardware, plastic, electronics
Product size: 100*80*75mm/3.94*3.15*2.95\"
Weight: 460g (no camera)
1. As long as the car stereo\'s installation size and machine size match, it can be installed and used.
2. When installing the machine, be sure to connect the wire correctly. If the installation does not power on the machine, please connect the red wire and yellow wire to the 12V power supply positive pole, the black wire to the power supply negative pole, try to see if the machine can normally power on. If it can be powered on normally, then it may be due to the problem of wiring, you can ask for our help, so that you can use the product better.
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not show the actual color of the item because of different photographing light, angle and display monitor.
1 X Host
1 X Remote Control
2 X Tail Lines
1 X Manual