– Solar panel charging.
– Built-in section 18650 lithium battery.
– High power, high brightness 8 LED lights.
– There is a button switch under the sun board, and the user can select different working modes as needed.
– Support PIR motion detection, wake up LED work.
– Easy to install and adjustable at different angles.
Battery: 3.7V, single 18650 battery, 2600mAh
Built-in protection circuit: Built-in over-discharge protection circuit, minimum discharge voltage 2.4V
Solar charging voltage: 5.0V
PIR sensing distance: human body sensing distance 5-6M
PIR sensing angle: 160 degree
PIR sensing maintenance time: 20s
Lamp Beads: 2835 Package
Color temperature: 6500K
Induction lamp bright constant current output: 330mA
Induction lamp light-on current: ≤14mA
Standby current: ≤100uA
Built-in solar light control: The light control detection voltage is ≥0.6 volts, the light is not bright; the night light is on.
Operating temperature range: -30-70 °C
Storage temperature range: -40-80 °C
Working mode: When the solar light control detection is ≥0.6V, the light does not light. When the solar light detection is <0.6v, the="" following="" four="" modes="" can="" be="" cyclically="" switched.="" (when="" button="" is="" operated="" for="" first="" time,="" it="" needs="" to="" illuminated="" in="" sun="" 5~10="" seconds)
– Mode 1: Press and hold the tact switch for 2 seconds to turn on the light, and the light flashes twice. When someone passes by, the light turns on for 20 seconds and then turns from bright to light.
– Mode 2: Short press the touch switch light to flash 2 times. When someone passes, the light turns on for 20 seconds, then the light turns off and the red light flashes. The solar light is charged during the day and the red indicator light is also shining. This mode red light is always shining.
– Mode 3: Short press the tact switch light to flash 2 times, the light will be slightly bright after 4 hours, and this mode is not controlled by PIR.
– Mode 4: Short press the tact switch, the light is off, enter the low power standby state.
Working temperature: -20 °C ~ 55 °C
Working humidity: RH: 15%~93%
Net weight: 370g
Gross weight: 400g
Packing size: 250*120*100mm/9.84*4.72*3.94in
Please allow 1-3mm measuring deviation due to manual measurement.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you.
1 X Solar Power LED Light