1. Compatible with all key and motor functions of the original switch (sensor function can be used).
2. Provide 4 red LED indication functions.
3. 16 key function input keys are provided to support turbo function.
4. Built in double motor, 256 level precision 3D joystick.
5. The button is sensitive and easy to control.
6. Compatible with PC host (supports X-input and D-input modes).
1. Function description:
Through Bluetooth, the handle is connected to the switch host.
In the off state, connect to the host PC through USB cable to realize the X-input and D-input mode functions.
2. Handle operation:
Press and hold the home button for three seconds for the first time to start pairing. Led1-4 flashes quickly, the pairing is successful, and the corresponding channel indicator assigned by the switch host lights up.
Connect again and press the home button to restart the connection. Led1-4 flashes slowly, indicating that the pairing is successful, and the corresponding channel indicator assigned by the switch host is on.
3. Motor function:
Handle with dual motor function.
When the handle is closed, when the handle is inserted into the adapter, led1-4 flashes, and when it is full, led1-4 goes out.
When the handle is connected to USB, when the handle is inserted into USB, the corresponding channel indicator light will flash slowly, and the indicator light will be very long after full charge.
5. Low power alarm:
When the battery voltage of the handle is lower than 3.6V (according to the principle of battery characteristics), the corresponding channel light will flash slowly, indicating that the power of the handle is low and needs to be charged.
After opening the handle, press and hold the home button for 5 seconds to enter the shutdown state.
When the handle is online, it will automatically shutdown within 10 minutes without any button operation.
7. About upgrading:
The handle can be driven directly from a USB drive.
8. Reset function:
When the handle is abnormal, it can be reset by pressing the reset button on the back of the handle.
9. Acceptance distance:
Depending on the environment, the receiving distance of the handle is 8-10m.
10. About PC cable mode:
Press and hold the \"+\" button and connect to the PC using the USB cable. LED1 and LED3 flash and stop at the second light, indicating that dinput mode has been entered. Press and hold the home button for 3 seconds to switch to XInput mode.
Battery: built in polymer lithium battery
Battery capacity: 500mAh
Battery life: 15-20 hours (game varies)
Charging time: 2.5 hours
Charging voltage: USB DC5V
Charging current: < 350mA
Charging interface: Type-C
Applicable: Fit for Nintend Switch/ PC /for PS3 / Android
Function: double vibration, with gyroscope, NFC function
Package size: 165 * 120 * 63mm/6.49*4.72*2.48\'\'
Package weight: 290g
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 X Bluetooth Controller
1 X Charging Cable
1 X User Manual