Mlx90640bab field angle 55 * 35 degrees (small angle, suitable for long-distance measurement).
Provide PC software to directly display temperature imaging graphics.
The module consists of a single-chip microcomputer. The serial port directly outputs 768 temperature data. USB sends TTL directly to the computer to view the data.
The original I2C interface of mlx90640 is reserved, and the sensor chip can be directly operated by an external MCU (PS connected to GND).
1. Use mlx90640bab sensor, which has been calibrated at the factory
2. Built in 1000mA rechargeable lithium battery, charging through mciro USB interface
3. With screenshot function, you can pause the picture for analysis
4. Use the screen color corresponding to the temperature adjustment function to set the temperature to display different colors.
5. With USB data transmission interface, the system can be upgraded and the internal system can be updated free of charge. The default system version is 1.0
Display: 2.4-inch color display, 320 * 240
Resolution: 32 x 24
FOV / minimum focal length: 55 ° * 35 °
Temperature range: – 40 ° – + 300 °
Measurement accuracy: ± 2 °
Image frequency: 8Hz
Emissivity: 0.1-1.0 / adjustable
Focus mode: fixed
Power supply: 1000mAh rechargeable lithium battery (including)
Working temperature: 0 ℃ – 50 ℃
Storage temperature: – 40 ℃ – 70 ℃
Humidity: < 90% RH
Size: 80 * 50 * 26mm/3.15*1.97*1.02\"
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
1 X Thermal Imager