The board provides the motor output with a flyback diode (free rotating diode), which enables it to withstand induction voltage even when the driver is not powered.
The v2 protector also contains a diode from the logical voltage (anode) to the motor voltage (cathode) to ensure the power supply sequence of all mute stepping bars.
This type of eliminator is mainly used for the vibration of the 3D printer with parallel structure. Especially the TMC2100 motor with lower resistance is more effective. It can effectively eliminate the uneven signal wave at low speed and achieve a relatively flat signal wave.
It is most obvious when using TMC2100 to drive the 24V power delta model, the wave cancellation effect of different machines will be different.
Application: for DVR8825, A4988, TMC2100, LV8729V and any two-phase four-wire stepper motor
Product size: 20 * 20 * 16mm/0.79*0.79*0.63\\\"
The effect varies according to the condition of the machine and the motor. It has nothing to do with the main control board and firmware. Any main control board and firmware are applicable. It is related to the motor, the motor resistance is small, the effect is more obvious. There will be heat phenomenon, if necessary, heat sink can be added to dissipate heat.
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
1 X Silent Step Stick Protector