The fine atomizing nozzle uses a brass body with stainless steel core guide vanes. The liquid forms a centrifugal vortex in the guide vanes. The fine hollow mist particles are sprayed from the nozzle holes, which can be widely used in plant humidification and cooling , Disinfection, dust reduction, landscaping, salt spray test and other artificial mist. This nozzle hole is drilled by American precision punching machine, the nozzle diameter is available from 0.1mm to 0.8mm (recommended 0.4mm), Excellent Workmanship, The nozzle is 100% tested before leaving the factory.
This series is a low-pressure spray. This nozzle can fully use the pressure of tap water for atomization.
9m/29.53ft Set: 3 Meters Water Supply Pipe, 6 Meters Spray Pipe, 11 Spray Seats, 11 Nozzles, 1 Faucet Connector, 1 Plug, 30 Ties, 30 Buckles
1. It is recommended to install the atomization system at a height of 2.5m to 3m.
2. Connect the adapter to the faucet.
3. Turn on the tap and clean the system for 1 minute to clean the system and remove impurities.
4. Screw the spray nozzle onto the tee fitting, except for one nozzle at the end.
5. Turn on the faucet to clean the system for 2 minutes to ensure that the system is completely cleaned.
6. Close the water and install the last nozzle to the joint, using the end plug.
7. A saddle clip is provided for fixing the atomizing pipe.
8. Turn on the faucet until the atomizer is working and enjoy the cooling atomizing system.
9. When not using the atomizing system for a long time, close the nozzle and keep it dry and clean.
1. This product provides customized services, according to customer needs to customize product specifications, such as the length of the water pipe and the number of nozzles, etc., can be customized product packaging.
2. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
3. Please allow 1-3mm measuring deviation due to manual measurement.
1 X Water Misting Cooling System Kit