℃ /℉ select.
Data retention function.
Laser target indicator ON / OFF selection.
Backlight on / off selection.
Power off automatically within 7 seconds without any operation.
This product is used to measure the surface temperature of the following objects: hot water pipes, engine hot parts, cooking surfaces, heat pipes and insulation, electrical connections, electric ballasts.
Easy to use:
The clear LCD display is aligned and shot.
Easily switch between ° C and ° F.
Includes backlight to improve night vision.
Normal mode: When the trigger is pressed, the device will provide continuous temperature readings.
Highest and lowest modes: the device scans all read temperatures and displays the highest or lowest recorded temperature detected.
Maximum measurement temperature 120 ° C and above
Display type: digital
Display size: 1.9 inches and below
Temperature range: -50 ~ 380 ° C(-58 ~ 626 ° F)
Accuracy: ± 1.5% or ± 1.5 °
Resolution: ± 1% or ± 1 °
Distance spot ratio: 12: 1
Emissivity: 0.95 (fixed)
Resolution: 0.1 ° / 0.1 °
Response time: 500m / sec, 95pct response
Spectral response: 8-14 um
Maximum display value: 380 ° C
Operating temperature: 0 to 40° C
Red laser power is less than: 0.5 MW
Power supply 2 x AAA batteries (not included)
Product size: 140 x 85 x 35mm/5.51 x 3.35 x 1.38\\\" (length * width * height)
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-3cm measuring deviation due to manual measurement.
1 X Infrared Thermometer
1 X User Manual