1. This product is a charger for Xbox One/ for Xbox One S/ for Xbox One X controllers.
2. Intelligent charging control, stop charging automatically when fully charged. Prevent damage to the battery caused by overcharging!
3. With charging indicator, easy to identify the charging status during the charging process.
4. Short circuit protection.
5. Equipped with 2 dedicated charging adapters, easy to use.
6. Conceal USB power cord, convenient storage when not in use.
Product model: PG-XB003
Product color: Black
Input voltage: DC 4.75V-5.25V
Input current: ≤1600mA
Single group charging current: ≤600mA x 2
Charging time: 6 hours
Product size: 240mm * 75mm * 13mm/9.45*2.95*0.51\\\"
Instructions for use:
1. Take out the USB cable at the bottom and plug it into the USB port of your console.
2. Insert a dedicated charging adapter into the charging interface of your controller, and then put it into the charging slot 1 or charging slot 2 to start charging.
3. When the controller is in charging, the corresponding charging slot indicator flashes, and the corresponding indicator stays on when fully charged.
4. After the controller is fully charged, if you remove the controller from the charging slot and put it in the charging slot again, the charging indicator will return to stay on after a short flash, indicating that the controller is fully charged.
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
1 X Controller Charger
2 X Charging Adapters
1 X Manual