1. Made of 3D printing one-piece plastic material.
2. Double screws are used for locking to enhance safety, and elastic sponge paper is attached inside to prevent damage to the body.
3. Fix and Hook the battery to prevent the battery Swell to open the cap from falling off when the drone is flying, and the power failure will cause the crash.
4. It is recommended to check whether the battery is swollen after each flight. It is not recommended to continue using the swollen battery.
Material: 3D Printing Plastic
Size: About 8.6 X 6 X 2.8cm/3.39 X 2.36 X 1.1\\\"
Gross Weight: 32g
Packing Size: 150 X 150 X 40mm/5.91 X 5.91 X 1.57\\\"
Compatible Model: for DJI MAVIC AIR 2
1. NOT including Drone.
2. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
3. Please allow 1-3mm measuring deviation due to manual measurement.
1 X Drone Battery Guard