Bluetooth Controller for PlayStation PS4/PS3 Gamepad Wireless Joystick Dual Vibration Console
1. Compatible for PS4/PS3 hosts.
2. Using high-performance wireless connection technology, it can provide reliable signals with no delay and no drop-off within 8m. It has strong anti-interference and is not affected by other wireless devices. Driver-free, automatic connection, no cumbersome code process.
3. Built-in rechargeable lithium battery, with charging display lamp and low voltage display lamp.
4. Built-in LED colorful lamp, the handle has the function of color LED light bar indicating player\'s handle channel, and different handle is indicated by different LED color.
5. Built-in left-right asymmetric motor, supporting dual-motor dual-vibration function.
6. Supports touch panel and panel button.
7. Built-in 3D acceleration sensor and G gyroscope sensor, with six-axis induction function.
8. The speaker and 3.5mm headphone jack are equipped to output the audio signal of the game through the speaker and headphone of the handle. The AXU extension port is reserved for reserve.
9. This handle can be upgraded by connecting the upgrade software on the computer end.
10. When the handle is operated without any action, it goes into dormancy for about 5 minutes, and the indicator lamp is off.
1. Connect to P4 host
(1)After the P4 host starts to enter the interface, insert the data line into the host\'s USB port, connect the handle to the data line, then press the small house menu key at the handle end, the LED light will flash, when the single color LED is always bright, indicating that the connection is successful. Then unplug the data line. The handle is automatically connected back to the host.
(2)Handle color LED indicator status description: display player status, press the small house key, LED light bar will light in order of blue, red, green and pink, configure the controllers, as player login order identification.
(3)Up to 4 wireless handles can be used simultaneously. The number of devices that can be connected at the same time varies from device to device.
(4)When the P4 wireless handle cannot be matched with the host, the maximum number of wireless devices that can be matched by the host has been exceeded. Please cancel the registration of unnecessary devices from the list of matched devices. In P4 host selection (settings)> (peripheral devices0> (wireless devices), select the device that you want to cancel the registration, press OPTIONS key, and then select (delete devices). It can follow the picture to operate.
2. Connect PC
(1)Connect the handle to the USB port of the PC through the USB data line, when the cable handle is used.
(2)PC terminal does not support six-axis induction and vibration function. When connecting to PC, for PS4 driver of PC terminal should be instalLED.
3. Connect to for PS3 host
(1)Connect the handle to the USB port for PS3 through the USB data line, when the cable handle is used.
(2)The device terminal does not support six-axis induction and vibration function, nor does it support the menu key function of the its terminal.
1. Wireless Distance: About 8m
2. Input voltage: DC 5.0V
3. Lithium battery capacity: 600MAH
4. Lithium battery weight: 14g
5. Working voltage: 3.6-4.2V
6. Working current: 20-80mA
7. Vibration current: 80-140mA
8. Packing size: 165x122x66mm/6.5×4.8×2.6\'\'
9. Packing weight: 280g
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3mm measuring deviation due to manual measurement.
1 x Joystick
1 x Charge Cable
1 x Manual