HX711 AD Weight Module:
1. This module uses 24-bit high-precision A/D converter chip hx711, which is designed for high-precision electronic weighing.
2. It has two analog channels and integrates 128-fold Gain Programmable amplifier.
3. The input circuit can be configured as a bridge sensor mode to provide bridge voltage, such as pressure and weighing. It is an ideal high precision and low cost sampling front-end module.
Body Load Cell Human Scale:
1. The inner part is 1000ohm half-bridge strain gauge, 50 kg weighing sensor, half-bridge structure.
2. When measuring, the external force is applied correctly on the outer side. The strain beam part of the E-shaped sensor (i.e. the arm of the strain gauge attached in the middle and the arm covered with white glue) and the outer side should form a shear force in the opposite direction, that is, the strain beam in the middle must undergo bending changes under the force, and there is no barrier on the other side of the stress surface of the strain beam.
The inner part of the sensor is a set of half-bridge strain gauges. There are three ways to use the sensor:
1. Using a sensor and external resistance to form a full bridge measurement, the measurement range is a sensor\'s range: 50kg. The requirement for external resistance is high.
2. Full-bridge measurement using two sensors. The measurement range is the sum of the two sensors: 50kg x2 = 100kg.
3. Full-bridge measurement with four sensors. The measurement range is the sum of four sensors: 50 kg x 4 = 200 kg.
Human Scale Size: 34mmx34mm/1.33×1.33\'\'
Packaging size: 120x80x15mm/4.72×3.14×0.59\'\'
Please allow 1-3cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understand.
4 X Human Scale Load Cells
1 X HX711 AD Module
1 X 10Pin Pin