This is a small current and voltage signal generator, you can generate two signals 0-20MA current signal, 0-10V voltage signal. The module is easy to use, the input data by key operation, and immediately updates the output signal.
1. Adopt LCD1602 display and standard LCD1602 interface.
2. This generator can generate current and voltage signals. Application for signal generator and instrument calibration.
3. The power port has polarity protection of input voltage, will not damage the components.
4. Output current: 0-20mA(accuracy: 0.5%FS). Output voltage: 0-10V(accuracy: 0.5%FS).
5. Key operation makes the signal immediately response after adjusting the data, no delay.
Output current: 0-20mA(accuracy: 0.5%FS)
Output voltage: 0-10V(accuracy: 0.5%FS)
Input voltage: 12-24V
Size: Approx. 8.5 x 6 x 2.3cm / 3.34 x 2.36 x 0.90inch
Instruction of keys:
FN: Switch to select current or voltage
SET: Switch to change the cursor position of value
UP: Plus key
DN: Minus key
V: positive power supply
G: common GND
OI: current output
OV: voltage output
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 X Digital Voltage Signal Generator