1.The induction lamp receives the infrared energy emitted by the human body through the infrared sensor, compares it, sends a signal to the processor, and then starts the illumination.
2. During use, when the person is active within the detection range, the light is automatically turned on; When the person leaves, the light will continue to illuminate for a set time and then turn off automatically.
3. The product is easy to install and screw directly onto the E27 lamp holder. It has the characteristics of power saving, long life, no radiation, environmental protection and explosion protection.
4. Widely used in automatic lighting in corridor, garage, closet, toilet, kitchen, basement, etc.
Product size: 60*65mm/2.36*2.56\" (light head), 80mm/3.15\" (pipe length)
Packing size: 155*120*70mm/6.10*4.72*2.76\"
Net weight: 84g
Gross weight: 102g
Lighting color: Warm White/Cool White
Delay time: 30-60 seconds, can be adjusted according to customer requirements
Induction angle: About 90 degrees
Induction distance: 5-6 meters
Configure the light sensor, the sensor light does not turn on when the illuminance is greater than 6 Lux or on daytime.
1. Used at -10 ° C ~ +35 ° C environment temperature.
2. Do not place in a humid place or a place near fire.
3. Do not use near water and corrosive liquids, flammable or explosive places.
1 X PIR Motion Sensor Light