Product size: 30*127cm/11.8*50.0\"
Product material: PVC
Product packaging: OPP packaging
Packing size: 30*5cm/11.8*1.97\"
Preliminary preparation: make a preliminary preparation for the vehicle to be constructed
1. Film preparation: including the design of the entire body style, film color, variety selection.
2. Preparation of the construction environment: It is best to have constant temperature, dust reduction treatment and sufficient lighting.
3. Personnel preparation: 2 to 4 people, to match and stretch film.
1. Clean the surface on which the decal will be installed
2. Cut the film, cut the color film according to the body film part, and make reasonable use of the remaining materials. When the film is cut, it is necessary to keep the film flat. It is best to cut it on the felt, and the film should not be folded.
3. Change the color film and use the two to tear the corners of the film. The adhesive side is sequentially covered from the corner of the car film portion to the surface of the vehicle body, and the process maintains the flatness of the color changing film. Squeeze the car surface with a scraper. Pleating, bubble treatment: soften the film surface with a baking gun to remove wrinkles. Small bubbles are usually caused by fine dust and can be handled with small blades.
4. Corner treatment: use the knife to remove the excess part of the extension line/side seam, and soften the stretch with a baking gun to achieve the full surface effect. Some parts can be processed by splicing film. Be careful not to scratch the paint surface.
5. Post-work: It is best to do a good job of hygienic cleaning, finishing work, and standing still for more than 24 hours.
Automobile hood, tail, surrounding, central control panel, handle, fuel tank cap, support plate and other automotive parts.
Automotive exterior packaging, automotive interior packaging. Mobile phones, computers and other electronic products
This product is also widely used: suitable for automotive interior decoration, but also for furniture, cabinets, wall renovation and modification. Modern mid- to high-end interiors and furniture finishes. Mainly used for finishing treatment of high places, such as auditoriums, restaurants, stores, department stores, hotels, offices, airports, apartments, villas, elevators, theaters; can be attached to shoe cabinets, bookcases, wardrobes, desks, plates, glass Wait for everything on the surface of the substrate to be smooth.
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
1 X Car Wrap Sticker