Human body motion sensor + light control + slightly light: solar energy-saving LED light, receiving sunlight charging during the day, at night, solar panel has light control sensing function, it will sense the light dark and turn on the illumination.
Mode: When the light is dark, it is slightly bright, some people pass, highlight, people leaves 30 seconds restored slightly light, when the light is strong during the day, the light is off.
1. LED energy-saving lamp beads.
2. ON/OFF waterproof switch to prevent water ingress.
3. RIP motion sensor.
4. Multi-angle free rotation, more practical.
5. IP65 high-end waterproof design to prevent rainwater leakage and effectively protect lamp life.
Supply voltage: DC 3.7V
Quiescent current: 10.2uA
Dynamic current: strong light (290.6mA) weak light (37mA)
Luminosity: strong 50K Pa Weak 2080 Pa
Number of LED: 2835*30
Light color: white
Color temperature: 6500K
Battery model: 18650×1
Standard capacity: 2000mAh
Actual capacity: 2050mAh
Over discharge voltage: 2.4V
Overcharge voltage: 4.2V
Protection level: IP65
Human body motion sensor: the distance from the ground is greater than or equal to 100 degrees, the sensing range is greater than or equal to 120 degrees, and the sensing time is 30 seconds.
When installing, please choose the place where there is sunlight.
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
1 X Solar Light
2 X Screws
1 X Switch Pin
2 X Rubber Stoppers