1. The board is made of high-quality FR4 fiberglass board, and each PCB board is tested by flying pin before leaving the factory.
2. The parameters of components are directly silk printed on the board, and can be directly welded without referring to the circuit diagram.
3. Note: This module is connected with 220V AC voltage, so when debugging, we must pay attention to safety to prevent electric shock accidents. We are not responsible for all accidents.
PCB size: 33 * 32mm/1.29*1.25\'\'
Rated power: P = UI; 500W = 220V * 2.27A
Model: 500W dimmer
Rated power: 500W
It is suitable for adjusting the speed of AC motor and lamp above 100W and below 500W.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 X PCB Board
2 X Wires
1 X 500K Potentiometer
1 X Potentiometer
1 X 2K Resistance
1 X DB3 Trigger Diode
1 X 630V104CBB capacitance
1 X BT136 SCR T0-220
1 X 20X13X8 Small Fins
1 X M3 + 6 Screws + Nut