1. The wireless receiving controller has high confidentiality, large storage capacity, stable performance and low power consumption.
2. It is easy to use, no need to use traditional jumper or DIP switch code, just need to let the wireless signal transmitted by the remote control to the receiving controller to receive and store, you can use it.
3. If the learned remote control is lost during use, simply clear the information stored in the receiving controller, and the lost remote controller will not be able to remotely control the receiving controller. To regain the right to use, you must The owner can learn again before using it again.
4. There are three types of self-locking, non-locking, interlocking and non-locking.
Signal is not locked – press the remote control number 1 to learn
Signal self-locking – press the remote control number 2 to learn
Signal interlock – press the remote control number 3 to learn
1-3 road non-lock, 4-6 road self-locking – press the remote control 4 button to learn
1-3 road non-lock, 4-6 road interlock – press the remote control 5 button to learn
1-2 road non-lock, 3-6 road interlock – press the remote control 6 button to learn
Learning methods and steps:
1. Press the receiving module to learn the key – the light is on, indicating that it enters the learning state.
2. Press any button on the remote control – the light flashes to off, indicating that the learning has been successful.
Clear saved information:
Press and hold the receiving module to learn the button for about 8 seconds until the indicator is off, indicating that the stored information has been successfully cleared.
Working voltage: 12V
Static working current: ≤6mA
Working temperature: -40 °C – +80 °C
Receive sensitivity: ≥-105dBm
Working frequency: 433MHz
Output voltage: AC, DC optional
Output current: ≤10A
Remote control battery: 12V 23A battery (not included)
Please allow 1-3mm measuring deviation due to manual measurement.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you.
1 X Romate Control (Not Included Battery)
1 X Switch