Mold Electric Grinding is one of the hand-powered tools
for micro-grinding, milling and polishing using high-speed rotation of
various shapes of grinding wheels and shaped carbide milling cutters. It
is suitable for mold control, fixtures, and complex parts and various
engraving artworks that are not easy to be machined on grinders or
special equipment. It can also be used for surface grinding and
polishing of various metal machinery.
1: When operating, the operator must wear safety glasses to prevent the wheel from rupturing and iron filings into the glasses.
2: Before using the electric grinder, the outer circle of the grinding
wheel should be trimmed so that the outer circle of the grinding wheel
and the shaft of the electric grinder are concentric. Otherwise, due to
the imbalance of the grinding wheel, its centrifugal force will cause
serious vibration of the electric grinder and affect normal operation
and Processing quality. The dressing of the grinding wheel can make the
grinding wheel of the grinder \"pair grinding\", or grind on the waste
grinding wheel, and compare the no-load noise before and after grinding
to judge the concentricity of the grinding head.
3: Mold electric
grinder is a micro-grinding, its strength is to use the adjustment
rotation to grind and polish. If the force is excessive, its speed will
drop sharply, it will not be able to grind and polish, and it will
damage the workpiece of the electric grinder to impact the workpiece to
prevent the operator from bursting and damaging the operator.
Before starting the mold electric grinder, check that the nut of the
chuck and the spindle are firm, the power cord is not allowed to be
damaged, the power cord can not be pressed by the workpiece, and the
power is not allowed to run for 1 minute after starting. More than 10%.
1.1300mAh lithium battery design, no wire binding.
2. Five-speed speed regulation, the use of scenes is more abundant.
3. Various accessories, more assured use.
4. Lightweight, easy to carry and use
5. The body is sturdy, anti-fall dustproof, porous heat dissipation, and cool down quickly.
Product size: 218*50*43mm/8.58*1.97*1.69\"
Outer package size: 280*230*70mm/11.02*9.06*2.76\"
Electric grinder weight:357g
Gear position: 5 files
Battery capacity: 1300 mAh
Charging time: fast charge for 90 minutes
Use time: 3 hours
Input voltage: 100-240VAC 50/60Hz
Output voltage: 12.6VDC 1000mA
Precautions for use:
1. Keep the work area clean.
2. Do not use in the rain, excessive moisture or flammable liquids and gases.
3. Keep the power cord away from heat, oil and sharp objects. Replace
the power cord when it is damaged. Do not touch the exposed conductor to
prevent electric shock.
4. When the tool is not in use, it should be placed in a place that is dry and not accessible to children.
5. Do not use more than the working ability of the tool. Do not use low-power tools to do heavy work to avoid damage.
6. Do not use this tool to do work outside of its functions.
7. Wear overalls and protective goggles when working.
1. Due to the different monitor and light effect, the actual color of
the item might be slightly different from the color showed on the
pictures. Thank you!
2. Please allow slight measuring deviation due to manual measurement.
1 X Kit Box
1 X Rotary Tool
1 X Driver
1 X Power Cable
1 X Accessory Case
2 X Grinding Chain Accessories
3 X Diamond Bits
5 X Diamond Burr Drills
1 X Spanner
1 X L Pin
2 X Sanding Shanks
5 X Grinding Wheel With Shanks
30 X Sanding Paper Discs
20 X Resin Cutting Discs
1 X Mandrel
2 X Drill Bits
1 X Stainless Steel Brush
2 X Collets
1 X Whet Stone
20 X Sanding Bands
10 X Felt Wheels