PLA is a more environmentally friendly plastic. Compared with ABS, it is stronger and harder, and compared with ABS, the appearance and feel of printed objects are more glossy.
As a material, PLA warps much less than ABS. Unlike ABS, PLA can be ground and machined. Moreover, the melting point of PLA is low. In addition, there is no need to print the heating bed.
Compared with ABS, PLA usually has clearer details and edges without the risk of cracking or warping. PLA can also print at a higher throughput speed.
Compatible with 3D printers of different brands (e.g. for Makerbot, Mendel, RepRap, UP, Prusa, Huxley, Bbf3000, Uprint, Cubify, Printrbot, Sumpod).
PLA filaments are often translucent and glossy.
PLA filaments are easy to use, but unstable and will dissolve if wetted.
We recommend PLA beginners to use it because it cools and sets faster, reduces warpage when it is more tolerant and easier to use.
This is an industrial material for professional use only, which is very suitable for 3D printer users.
In order to achieve good performance, it is necessary to use a roller of suitable size and a calibrated hot end. The blockage of the printer is usually due to the improper size of the drum and / or liner.
Diameter: 1.75 ± 0.1mm
Printing temperature range: 180 ° C to 200 ° C
Weight: 1kg / roll
Each spool is sold in 1kg by weight, not by length.
The diameter tolerance will vary depending on the density of the material, the melting point will vary depending on the density of the material, and the feed rate and the size of the hot end used will also affect the melting point.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-3cm measuring deviation due to manual measurement.
1 Roll X 3D Printer PLA Filament